Operation Manual

Option 2
1 Same procedure as Option 1, except that you plug the audio cable into
the headphone port (usually located at the front of your TV). If you use
this connection mode, adjust the volume of the headphone output to a
medium level. If this connection mutes the TV speaker sound, you can
deactivate the muting function by using the TV setting menu.
Option 3
1 If your TV does not have a headphone or audio output jack, you can
place an optional microphone module directly in front of the TV loud-
speaker to pick up the sound for transmission.Connect the other end of
the microphone module to “TV Audio“ at the rear of the transmitter
base. Set the selector to the MIC position.
Placement of the transmitter base
Place the transmitter on top of
your TV or on your TV stand so
that its front (line of sight) is
pointed directly at the viewer.
Make sure there is nothing in
front of the receiver blocking
the path. The powerful trans-
mitter can cover any room size
up to 30 ft. x 30 ft.
GETTING STARTED
17
Helpline UK 0844 800 6503
(See page 24 for costs and hours of operation)