Specifications

Amplivox Sound Systems - Call 800-267-5486 for assistance - www.ampli.com for support and registration- 10/30/2009Amplivox Sound Systems - Call 800-267-5486 for assistance - www.ampli.com for support and registration- 10/30/2009
Warnings
12
Warning
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guar-
antee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment o and on, the user is
encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment to an outlet on a circuit di erent from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: To assure continued compliance, any changes or modi cations not
expressly approved by the party responsible for compliance could void the
user’s authority to operate this equipment. (Example use only shielded interface
cables when connecting to computer or peripheral devices).
CAUTION :To reduce the risk of electric shock, do not
remove the cover, No user serviceable parts inside. Refer
servicing to quali ed personnel. Exception: Battery may
be changed by user if correct procedure is followed.
WARNING: To prevent  re or electric shock, do not
expose this equipment to rain or moisture.
Explanation Of Graphical Symbols
The lightning  ash with arrowhead symbol, within an equilateral triangle, is
Intended to alert the user to the presence of uninsulated dangerous voltage
within the products enclosure that may be of su cient magnitude to
constitute a risk of electric shock to humans.
The exclamation point, within an equilateral triangle, is intended to alert the
user to the presence of important operating and maintenance(servicing)
instructions in the literature accompanying the appliance.
Instructions on Changing Main Unit Battery
11
Refer to instructions and diagram below for changing batteries.
1. Please switch power o before changing the batteries.
2. Remove the 4 screws on the battery covers and remove batteries plates from
main panel board and take old batteries out. Install the new batteries 12V/4.5A
into battery compartment.
3. Make sure each battery is properly inserted. Then:
Connect red line into Positive R1 Red Line Terminal
Connect black line into Negative B2 Black Line Terminal
Connect Negative B2 Black Line Terminal to Gathered Negative B1
Connect Negative B1 Black to Positive R2 Red.
Note: Make sure the pole matches the color.
4. Then reattach the battery covers with four screws that were removed at the
beginning of the procedure.
Attaching battery incorrectly may result in battery  uid
Expulsion, corrosion, and possibly injury. Please call for
technical assistance if needed. (800-267-5486)