Owner's Manual

EN-5
RDS
AF (Alternative Frequency):
When the radio signal strength is weak,
enabling the AF function will allow the unit
to automatically search another station
with the same PI, but with stronger signal
strength.
PS (Program Service name): The name of
station will be display instead of frequency.
Press 2 seconds the [DSP] button and
select [ / ] to set AF/TA/REG, rotate the
[volume] knob to open or close AF/TA function.
PTY function
Hold the [SRC] button to PTY function, rotate
the [volume] knob, display NEWS and POP
program type.
Press 2 seconds [SRC] button and rotate
the [volume] knob to select the type of
station INFO-SPORT-EDUCATE-DRAMA-
CULTURE-SCIENCE-VARIED-POPM-
ROCK M-EASY M-LIGHT M-CLASSICS-
OTHER M-WEATHER-FINANCE-CHILDREN-
SOCIAL-RELIGION-PHONEIN-TRAVEL-
LEISURE-JAZZ-COUNTRY-NATIONM-
OLDIES-FOLK-DOCUMENT-TEST-ALARM
REG on: AF function will implement the
regional code (of the PI) and only stations in
the current region can be tuned automatically.
REG off: AF function will ignore the regional
code(of the PI) and stations in the other
regions can also be tuned automatically.
Button Tips
CT ON/OFF
While listening an FM RDS station, transmitter
updates automatically the clock on the radio
unit.
Automatic display of the clock
This function allows to display automatically
the clock instead of the "standard" display
(tuner, Aux, A2DP, USB). After 15 seconds, in
case of manipulation of buttons the display will
turn back to "standard" display and will return
on the clock.
nb : Noted: some radio stations, besides their
name, reveal " RT + " information (name of
the artist, titles, etc.), in this case the clock will
display between 2 scrollings of text.
Activation:
Press 2 seconds on "DSP" and then press the
button [ / ] several times to select function.
CLOCK_DISP displays, select ON to activate
the function.
BT Audio
To play music from a Bluetooth device and
control with the unit.
1. Press [SRC] button several time up to select
BT MUSIC mode. If the Bluetooth device is
connected, the display shows A2DP.
2. To play or pause, press "1" and/or [ / ]
to skip the track
MUSIC mode : If the Bluetooth device is
connected, the display shows A2DP.
VOL LAST/ADJ mode
Rotate the [volume] knob to select VOL LAST
or ADJ mode.
In ADJ mode, rotate the [volume] knob to adjust
S-VOL 5-30.
BEEP mode
Rotate the [volume] knob to select button beep
sound on or off.
SCROLL mode
Rotate the [volume] knob to select SCROLL (ID
Tag) mode on or off.
SWRC function
(system wired remote control)
This function allows to control main functions of
the radio (VOL-/VOL+ /Source /SEEK+/SEEK-/
Tune Memory /BT-OFF hang off) in USB/BT/
A2DP/AUX.
To do so, you need a wired remote to connect
to the female input 3.5, yellow connector at the
back of the radio.
SWRC SET
Activate or deactivate the steering wheel
controls
SWRC (RESIST / PWM) on CT412-
DAB
Allows you to select the signal
mode of the steering wheel controls: