Spec Sheet

®
A Gorman-Rupp Company
®
A Gorman-Rupp Company
Manufacturer of AMT & IPT Pumps
400 Spring Street • Royersford, PA 19468 USA
www.amtpump.com • 888-amt-pump (268-7867)
The Gorman-Rupp Company reserves the right to discontinue any model or change specifications at any time without incurring any obligation.
©2012 American Machine and Tool Company. All rights reserved.
12 Volt DC Submersible Pump
1212
SUB-8
35
40
1.5
1.5
Aluminum
Aluminum
14
Ship Wt.
(Lbs.)
Motor
Enclosure
Electric Submersible Pump
Electric Submersible Pump
Optional Carrying Case
Description/Type of Pump
5890-DC
5891-DC
5890-90
Model
(*) Standard NPT (Female) Pipe Thread.
(**) Stainer defines maximum solids handling.
NOTE: All dimensions are in inches (centimeters) and have a tolerance of ±1/8˝.
NOTE: Electric Supply for ALL motors must be within ± 10% of nameplate voltage (Ex: 230V = 203 to 253)
1/3
1/3
HP
DIS*
Buna Carbon Ceramic
Buna Carbon Ceramic
Seal Type
& Elastomer
12V DC
12V DC
Voltage
@ 60 Hz
30
26
Full Load
Amps
A
Suction Strainer
H
0.38/[0.9] Dia. Holes
Located On 0.5/[1.2]
Staggered Centers.
22.4 [56.9]
19.1 [48.5]
8.8 [22.3]
9.8 [24.9]
W
Standard Features
• Aluminum Construction with Cast Iron Impeller
• 1/3 HP, 12 Volt DC 30 Amp Motor
• 30 Ft. Insulated (PVC) Conductor Cable with Battery Clips
• Built-in Carry Handle
• On/Off Switch
• Maximum Temperature 104° F
• 1-1/2" NPT (Female) Discharge
• Steel Strainer Built into Pump
• Buna-N Mechanical Seal with Carbon and Ceramic Faces
• Overload Protected
• Stock Availability on this Model
• QSP – Quick Ship Pump
Pump Dimensional & Specification Data
5891-DC
5890-DC
NEW DESIGN FOR 2019
MODEL # 5891-DC
1219