Instruction manual

17. OFFSET MEASUREMENT

PROCEDURE

1. Install two offset points (1st target, 2nd target) on

a straight line from the target point and use the

offset points as the target.

2. Select "Offset" in <Menu> to display <Offset>.

Select "5.Offset2D".

3. Press [CNFG] and input the distance from the

2nd target to the target point in "Offset dist.". Set

reflector settings and press [OK] to confirm.

•Press [LIST] to edit the prism constant and

aperture in <Reflector setting>.

4. Sight the 1st target and press [MEAS] to start

measurement.

Press

[

STOP

]

to stop the measurement. The

measurement results are displayed. Press [YES]

to confirm.