Instruction manual

20. CHANGING THE SETTINGS
122
Items set and options (*: Factory setting)
Temperature: Celsius*/Fahrenheit
Pressure: hPa*/mmHg/InchHg
Angle: Degree (DDD.MMSS)*/Gon/Mil
Distance: Meter*/Feet/Inch
Feet (only displayed when "Feet" or "Inch" selected above):
International*/US
$
• OS rounds off the value input by the digit of less than 0.004 feet/0.017 inch.
& Inch (Fraction of an inch)
“Fraction of an inch” is the unit used in the United States and expressed like the following
example.
G
• Even if “inch” is selected in this setting, all the data including the result of area calculation are
output in “feet” and all the distance values must be input in “feet”. In addition, when the “inch”
display exceeds the range, it is displayed in “feet”.
20.8 Units