Instruction manual

21. WARNING AND ERROR MESSAGES
126
Device list is full !!
No more Bluetooth devices can currently be registered. Delete unnecessary devices from the list
and try again.
Disconnect Bluetooth
Wireless connection disconnected. Re-connect and try again.
Error: Read Build Info.
Error: Read sysflg
Error: Self check
Error: Read OS Parameter
Error: Write sysflg
Press [OK] to cancel the message. If this error message appears frequently, contact your local
dealer.
File does not exist !!
No file exists with the input filename.
Folder already exists !!
The folder name input already exists.
Folder creation error !!
Folder creation failed.
Incorrect password.
Input password does not match set password. Input correct password.
Input device name !!
Bluetooth device name not input. Input device name and complete device registration.
Input over 3 letters !
The input password consists of less than 3 characters. Input a password at least 3 characters in
length.
It is not possible to save in this folder !!
Data cannot be saved in the selected folder. Select a different save location.
Linear !!
The three input points form a straight line.
Need base pt. obs
During REM measurement, the observation of the target was not completed normally.
Reset and sight the prism and perform measurement again.
Need 1st obs
During missing line measurement, the observation of the starting position was not completed
normally.
Sight the starting position accurately and press [MEAS] to perform the measurement again.