Instruction manual

2. PRECAUTIONS

Exporting this product

• This product is equipped with the parts/units, and contains software/technology, which are subject

to the EAR (Export Administration Regulations). Depending on countries you wish to export or bring

the product to, a US export license may be required. In such a case, it is your responsibility to obtain

the license. The countries requiring the license as of January 2012 are shown below. Please consult

the Export Administration Regulations as they are subject to change.

North Korea

Iran

Syria

Sudan

Cuba

URL for the EAR of the US: http://www.access.gpo.gov/bis/ear/ear_data.html

Maintenance

• Wipe off moisture completely if the instrument gets wet during survey work.

• Always clean the instrument before returning it to the case. The lens requires special care. First,

dust it off with the lens brush to remove tiny particles. Then, after providing a little condensation by

breathing on the lens, wipe it with the wiping cloth.

• If the display is dirty, carefully wipe it with a soft, dry cloth. To clean other parts of the instrument or

the carrying case, lightly moisten a soft cloth in a mild detergent solution. Wring out excess water

until the cloth is slightly damp, then carefully wipe the surface of the unit. Do not use any alkaline

cleaning solutions, alcohol, or any other organic solvents on the instrument or display.

CFor temporal de-activating the touch panel, see "5.2 Display Functions", "20. CHANGING

THE SETTINGS"

• Store the instrument in a dry room where the temperature remains fairly constant.

• Check the tripod for loose fit and loose screws.

• If any trouble is found on the rotatable portion, screws or optical parts (e.g. lens), contact your local

dealer.

• When the instrument is not used for a long time, check it at least once every 3 months.

C"22. CHECKS AND ADJUSTMENTS"

• When removing the instrument from the carrying case, never pull it out by force. The empty carrying

case should be closed to protect it from moisture.

• Check the instrument for proper adjustment periodically to maintain the instrument accuracy.