Instruction manual

5. BASIC OPERATION

(Method 2)

1. Select [EDM] in the first page of Measure mode

or "EDM" in Config mode/Configuration mode.

2. Move to "Reflector" using {O}/{G}/{TAB}.

3. Switch between Prism, Sheet, and N-Prism using

{K}/{L}.

4. Press {ENT} to confirm selection.

Screens can be selected/operated using the keys on the keyboard or the touch panel. The touch panel

can be operated using either the stylus pen provided or your fingers.

It is also possible to de-activate the touch panel temporarily.

C"20. CHANGING THE SETTINGS"

• Do not scratch the display or use any sharp implement other than the stylus pen to operate the touch

panel.

Using the stylus

The stylus pen can be used to select menus and buttons on the screen and operate the scroll bar. The

touch panel supports "tap", "double tap", and "drag" operations.

5.2

Display Functions

Operation Method

Tap Lightly tap the display once. This operation is equivalent to the clicking of a

mouse button when using a computer.

Double tap Lightly tap the display twice on the same point.This operation is equivalent

to the "double-click" for a computer mouse.

Drag Lightly apply the point of the stylus pen to the display and move in the

desired direction, maintaining contact between the stylus and display all

the time.