Instruction manual

5. BASIC OPERATION
26
(5) Tilt angle compensation
The vertical and horizontal angles are automatically compensated for small tilt errors using the
OS's dual-axis tilt sensor. This icon displays the status of this function.
: Horizontal and vertical tilt angles compensated (blue)
: No compensation
: Only vertical tilt angle compensated (green)
$
• is displayed when the instrument is out of level.
(6) Communication status with external devices
Selection and configuration of communication status with external devices. This icon is not
displayed in Program mode. Bluetooth settings can only be selected when using instruments
incorporating the Bluetooth module.
: Connection via RS232C cable
: Connection via Bluetooth wireless technology (OS set as "Master"
device) (blue antenna)
: Connection via Bluetooth wireless technology (OS set as "Slave" device)
(green antenna)
$
• When Bluetooth communication is selected (OS set as "Master" device) a connection can be
initiated/canceled
• by tapping / .
Connection status to external devices is displayed as follows.
i) Connection via Bluetooth wireless technology
When OS is set as the "Master" device the antenna mark is blue. When the OS is set as the
"Slave" device the antenna mark is green.
: Connecting
: Canceling connection
: (Antenna is purple - moving)
OS set to "Master": Inquiring about other Bluetooth devices
: (Antenna is purple - stationary)
Communication settings in progress/Preparing for
communication (Instrument just powered ON or just switched to "Slave")
: Connection error (icon flashes green and red)