Instruction manual

ii
HOW TO READ THIS MANUAL
Symbols
The following conventions are used in this manual.
[Softkey] etc. : Indicates softkeys on the display and window dialog buttons.
{Key} etc. : Indicates keys on the operation panel.
<Screen title> etc.: Indicates screen titles.
Notes regarding manual style
• Except where stated, “OS” means OS-101/102/103/105/107 in this manual.
• The OS Series is available in "standard", "High Temperature", and "Low Temperature" models.
Users with a "Low Temperature Model" should read the additional precautions specific to use under
low temperatures.
● Low Temperature Model
Low Temperature Models display the seal shown at right.
G
• Do not remove the Low Temperature Model seal from the
instrument. This seal is used for model recognition by our
engineers during maintenance.
• Screens and illustrations appearing in this manual are of OS-103 (with Bluetooth module and
display on face 1 only). Face 2 display is available as standard or as a factory option depending on
the country of purchase.
• Location of softkeys in screens used in procedures is based on the factory setting. It is possible to
change the allocation of softkeys.
CSoftkey allocation: "20.6 Allocating Key Functions"
• Learn basic operations in "4. PRODUCT OUTLINE" and "5. BASIC OPERATION" before you read
each measurement procedure. For selecting options and inputting figures, see "5.1 Basic Key
Operation".
• Measurement procedures are based on continuous measurement. Some information about
procedures when other measurement options are selected can be found in “Note” (
$).
G
:
Indicates precautions and important items which should be read before
operations.
C
: Indicates the chapter title to refer to for additional information.
$
: Indicates supplementary explanation.
&
: Indicates an explanation for a particular term or operation.
Low temperature
seal