Instruction manual

13. DISTANCE MEASUREMENT

3. Sight the target and press [MEAS] to start

measurement. Press [STOP] to stop the

measurement.

The measured distance data, vertical angle and

horizontal angle are displayed.

4. Sight the object, then press [REM] to start REM

measurement is started. The height from the

ground to the object is displayed in "Ht.".

Press [STOP] to stop the measurement.

• To re-observe the target, sight the target then

press [MEAS].

• To continue REM measurement, press [REM].

• When measurement data already exists, select "REM" in <Menu> as in step 2 to proceed to step 4

and start REM measurement. Press [STOP] to stop the measurement.