Instruction manual

15. RESECTION MEASUREMENT

Only Z (height) of an instrument station is determined by the measurement.

• Known points must be measured by distance measurement only.

• Between 1 and 10 known points can be measured.

PROCEDURE

1. Select "Resection" in <Menu>.

2. Select "Elevation" to display <Resection/Known

point>.

3. Input the known point.

After setting the elevation and target height for the

first known point press [NEXT] to move to the

second point.

• Press

[PREV] to return to settings for the

previous point.

When all required known points have been set,

press [OK].

15.2

Height Resection Measurement