Specifications

1-2
When viewing a file, you can adjust the screen settings the same as
when you are viewing a “live” measurement. Using the built-in serial port,
you can print files and even upload them to JDSU's StealthWare for
further analysis and archiving.
AUTO TESTS
Automated tests are easy with the MS1400. These tests provide a
convenient way of acquiring proof-of-performance compliance data.
Tests can be executed immediately or scheduled over a period of time.
To conserve battery life, MS1400 shuts itself off between scheduled
intervals. When configuring an Auto Test, you can record information
about the location at which the test is being performed. Files can be
created for commonly tested locations. Thus you need only enter the
information once.
Auto Test results consist of time, date, and temperature and can be
viewed on the LCD screen. Limits are applied to the measurement data
with out-of-tolerance conditions concisely indicated. You can print a test
report for each interval or a comprehensive 24-hour report that
summarizes data collected for up to four intervals. Auto Test result files
can be uploaded to JDSU's StealthWare.
INGRESS SCAN
Ingress Scan is a feature that allows the user to monitor ingress signals.
All units are equipped with a standard 5 - 890 MHz ingress scan.
THE FRONT PANEL AND KEYBOARD
The keypad (see figure on Page 1-3) consists of the following:
• three Soft keys
• Power key
• four Mode Selection keys
• Enter key
• eleven Alphanumeric keys
• Shift key (Green)
• four arrow keys