Specifications

Alphanumeric Keys
The alphanumeric keys are used to enter data while operating your
MS1400. Notice that these keys have a numeral and up to three
alphabetic characters labeled on them. You can only access the
characters when alphanumeric entry is appropriate. In the
alphanumeric entry mode, you sequence through each character
and the numeral by repeatedly pressing the key. You can also
access a set of special characters that do not appear on the keypad
by pressing Up/Down Arrows. Once the desired character is
displayed, move the cursor to the next position using the Right
Arrow soft key. Be sure to terminate your entry by pressing Enter
key.
Shift Key (Green Key)
Some keys perform more than one function. A green icon located
next to the key represents the secondary function. Notice that the
icons are color-coded the same as the Shift key. You access the
secondary function by first pressing the Shift key and then the icon
representing the desired function.
NOTE: If you press Shift key and Soft key 1,
the unit will display the following screen:
Secondary Functions
Configure Mode
Configures your MS1400 for your own specific needs.
1-6