Specifications

MEASUREMENT CONFIGURATION SCREEN
Temperature Units
Selects the units in which temperature measurements are displayed
and printed. You can select °C or °F.
Signal Level Units
Selects the units that will be used for all signal level measurements.
You can select from: dBµV, dBmV and dBm.
Probe Compensation
This can be used to compensate for losses associated with probe
points found on certain amplifiers. You can enter a value between
-99.9 and +99.9 dB. Probe compensation is added directly to signal
level measurements. The compensation value is indicated in the
upper left-hand corner of the measurement screens. There is no
indication, however, if the compensation value is zero.
IMPORTANT: The PROBE COMPENSATION
value does not affect INSTALLATION mode.
Level measurements made while checking an
installation are uncompensated.
Frequency Tuning Step Size
This setting affects the increment/decrement step size when you are
tuning the frequency by pressing the Left/Right Arrows. You can
select a value between 25kHz and 100MHz in steps of 25kHz.
1-19