Specifications

Note that the enabled test points carry a check mark.
To disable a limit, select the Limit and press Select soft key.
A check mark appears in the left-hand column to indicate when a
test point is enabled. If the test point is already enabled, pressing
the Select soft key disables it.
You can edit the limits for the highlighted test point by pressing the
Edit Limits soft key. The limits appear on the screen. You may
have to scroll down the list to see the all the limits.
NOTE: If you disable all of the limits within a
test point, the test point becomes disabled.
You cannot enable a test point that has no
enabled limits.
1-21