Specifications

The unit will complete the build and display the Build Channel Plan-
STEP 5 screen (shown right above).
Press Right soft key to return to the main Channel Plan menu (page
1-23).
How to Edit the Channel Plan
Why edit the Channel Plan?
An accurate channel plan is essential for testing the cable system,
including limits for analog and digital carriers.
Editing is required to verify that the channel plan is built correctly
(has the right parameters).
From the Channel Plan screen (page 1-23), press Up/Down Arrow
keys to highlight EDIT CHANNEL PLAN, then press Enter. This will
bring up the Edit Channel Plan screen.
The screen contains a list of all channels, their frequencies and
activation status (enabled channels carry a check mark under the
ENA column). To disable a channel, highlight the Channel and then
press Left soft key.
To edit a channel's parameters, highlight that Channel and then
press Center soft key. This will bring up the Edit Channel screen.
1-28