Specifications

1-30
• AUD OFFSET (MHz)
Enabled
As mentioned earlier, a channel must be enabled in order to be
measured. This is another place where you can enable or disable
the channel.
Type
There are three channel types from which to choose:
• TV - the standard video and audio carriers
• DUAL - a video carrier with two independent audio carriers (a
European format)
• SNGL - a single carrier
• Carrier (SNGL Type only)
Select the Format of the Carrier to be measured
• Analog
• QAM (Digital)
• QPSK (Digital)
• QPR (Digital)
• CAP-16 (Digital)
IMPORTANT: Digital signal level
measurements are accurate only when
performed on carriers that are in a state of
continuous (non-burst) transmission.
Frequency
This is the frequency of the video carrier in MHz. For a digital
channel, the center frequency is required.
Measurement Bandwidth (digital format only)
Enter the width in frequency of the digital carrier to be measured.
Channel Number
The channel number can range from 1 to 999.