Specifications

1-31
Label
You can enter a label up to four characters in length for each
channel. This label appears next to the channel number on most
screens to help you remember what programming is on that
channel.
Package
You can organize channels into packages. In the edit box, you can
select any package that is enabled (see Select Channel Packages
page 1-32). When you are checking an installation, you can specify
which packages the subscriber has ordered and your MS1400 will
verify that the channels are correctly installed.
Scrambled
If the channel is scrambled, select YES here so that accurate
measurements can be made.
IMPORTANT: MS1400 supports several
scrambling formats including the following:
• Horizontal Sync Suppression
• Vertical Sync Suppression
• Positive Trap
Audio Offset (TV and DUAL type only)
This is the offset between the video and audio carriers in MHz.
Audio Offset 2 (DUAL type only)
This is the offset between the video and second audio carriers in
MHz.
When you are finished editing the channel, press OK soft key to
return to the channel list.
How to configure a digital carrier
1. From the Configure - Edit Channel Plan screen (page 1-28),
highlight the channel that you wish to configure as digital, or
select an unused channel.
2. Press Enter key to bring up the Configure - Edit Channel screen.
3. Highlight TYPE, choose SNGL and press Enter key.