Specifications

4. Highlight Carrier and press Enter key. Select a digital carrier
(QAM, QPSK, QPR, CAP-16) and press Enter key.
5. Highlight Frequency, press Enter key. Type in a value for
Center Frequency and press Enter key.
6. Highlight Measurement BW (MHz), press Enter key. Type in a
value for the bandwidth and press Enter key.
7. Highlight channel number, press Enter key. Type in a value for
the channel number and press Enter key.
8. Press Return soft key.
Select Tilt Channels
From the Channel Plan screen, highlight SELECT TILT
CHANNELS and press Enter to specify carriers to measure on the
TILT screen. A list of all enabled channels in the current plan
appears.
Up to six channels can be selected. To select a channel, press
Up/Down Arrow to highlight the desired channel in the list, then
press Left soft key. A check mark appears in the left-hand column
of the list indicating that this is now a TILT channel. Also, the
channel number appears in one of the six boxes above the list.
Press Select a second time to deselect the TILT channel.
Select Channel Packages
From the Configure- Channel Plan screen (page 1-23), choose
CHANNEL PACKAGES. Press Enter to bring up the Channel
Packages screen listing all available packages. These are the
1-32