Specifications

available test points. The test point that you have selected is
represented in the upper portion of the screen by one of the
following icons:
Subscriber Drop
Ground Block
Tap
User Defined
NOTE: Be sure that you have enabled all of
the test points that you are interested in using.
The Sequence Through Test Points soft key is
only available if there is more than one
enabled test point. (see Checking Limits, page
2-13).
IMPORTANT: Only the limits that are enabled
in the selected test point are checked (see
Checking Limits, page 2-13).
Installation Results Summary
This is the overall limit check summary for all channels in the
packages that you have selected. Scroll down the list to see all the
limits results.
To quickly determine the status of the overall limit check, look at the
PASS/FAIL indicator located in the upper portion of the screen. This
indicates FAIL if any channel is not within the required limits. For
each limit, the worst case actual value is displayed along with a
pass/fail status.
2-3