Specifications

LEVEL
Press Level Mode key to select LEVEL mode or choose Level
Mode icon from the NAVIGATOR. Here you can measure the
signal level of a specific channel or frequency. The level is
indicated both numerically and on an analog meter.
Adjusting The Reference Level
You can adjust the reference level setting of the analog bar meter
pressing the Up/Down Arrows. When you press Shift + Autoscale
keys, your MS1400 automatically sets the optimum reference level
for you.
Tuning By Channel
When you are tuned to a channel, both the video and audio carriers
of the channel are measured and displayed simultaneously. The
difference between the video and audio carriers (DVA) is also
shown. The channel number, type and label for the channel that you
are currently tuned to appear in the upper right-hand portion of the
screen. You can press the Left/Right Arrows to tune to the
previous or next enabled channel in the plan. You can also use the
numeric
Tuning By Frequency
The Toggle Between Frequency/Channel Tuning soft key toggles
between frequency and channel tuning. When you choose
frequency tuning, your MS1400 tunes to the video carrier frequency
of the selected channel.
2-7