Specifications

Use the Left/Right Arrows to tune your MS1400. The frequency
increments or decrements by the step size that you have specified
in the Measurements configuration (see Frequency Tuning Step
Size page 1-19). You can also use the numeric entry keys to tune
directly to the frequency desired.
Measuring Digital Carriers
Your MS1400 measures the signal level of digitally modulated
carriers. You will need to define a single (SNGL) type channel and
specify the carrier modulation format and measurement bandwidth
for each digital carrier that you want to measure (see How to Edit
the Channel Plan page 1-28).
IMPORTANT: Digital signal level
measurements can only be performed on
carriers that are in a state of continuous (i.e.,
non-burst) transmission.
When you have selected a single type channel with digital carrier
modulation, the measurement bandwidth and carrier modulation
format are displayed beneath the numeric level value on the right-
hand side of the screen.
2-8