Specifications

scale value. Press Exit Scale Submenu soft key when you have
finished.
Zooming In And Out
To zoom in on or out from the channel selected by the marker,
press Enter Zoom Mode soft key. A new set of soft keys will
appear. Use Zoom In soft key to zoom in and Zoom Out soft key to
zoom out. The magnification factor is displayed above the graph.
Press Exit Zoom Mode soft key when you have finished.
Checking Limits
You can verify that the carrier levels are within limits. First, you need
to tell your MS1400 which test point you are at. This determines
which set of limits is used.
Press Enter Limits Submenu soft key to access the limits
submenu. A new set of soft keys will appear.
Press Cycle Through Test Points soft key to sequence through
the available test points. The test point that you have selected is
represented in the upper portion of the screen by one of the
following icons:
2-13