Specifications

NOTE: The limit check results are updated
with each scan. They are also updated
immediately when you press Cycle Through
Test Points or Toggle Display of Hash Lines
soft keys.
When you are finished viewing the overall limit results, press Exit
Limits Submenu soft key to return to the main menu.
Checking Limits On An Individual Channel
Indicators appear in the marker information area when a channel is
outside the limits of the currently selected test point.
Up or down arrows to the left of the video level and DVA numeric
measurement tell you when the limits have been exceeded.
measurement too high
measurement too low
When an adjacent channel error occurs, one of the following
indicators will appear in the lower left-hand area of the marker
information area:
lower adjacent channel level
upper adjacent channel level
both upper and lower adjacent channel levels
Measurement Hold
You can freeze the scan measurement at any time by pressing the
Shift + Snapshot keys. The measurement is retained even if the
cable is disconnected from the input port. Notice that the mode icon
in the upper left-hand portion of the screen flashes when the
measurement is on hold. Press Shift + Snapshot keys again to
release the hold. The measurement is not retained when another
mode is selected or the MS1400 is shut off.
Printing The Screen
You can print the entire screen at any time by pressing the Shift +
Print keys. A bar graph appears indicating the status of the printout.
2-15