Specifications

Storing A Scan File
Press Shift + Store keys to store the current scan measurement
into a file. A screen will appear asking you to enter a name for the
file. Once stored, you will be able to recall the file at a later time and
view it on the Scan screen. You will be able to adjust the screen
settings the same as when you are viewing a “live” measurement.
See VIEW page 2-27 to find out how to access files that you have
stored.
Warning Indicators
If the current measurement is inaccurate due to an out-of-range
condition or a hardware failure, your MS1400 warns you by
displaying one of the following warning indicators to the left of the
numeric level measurement in the marker information area:
Over-range
The signal level is above the measurement range of the
instrument.
Under-range
The signal level is below the measurement range of the
instrument.
Error
A hardware problem exists. If this condition persists, contact the
nearest JDSU Service Center.
2-16