Specifications

TILT
TILT mode simplifies the process of balancing an amplifier. TILT mode
can only be accessed by choosing Tilt Mode icon from the
NAVIGATOR. A spectral graph of the TILT carriers appears.
IMPORTANT: You can choose which carriers
appear on this screen when you configure your
channel plan (see Select Tilt Channels page 1-
32).
Moving The Marker
You can view up to six carriers. A vertical marker appears over the
currently selected carrier. The channel number, type and label
appear in the upper right-hand portion of the screen. The frequency
and level of the selected carrier can be seen directly beneath the
graph. You can press the Left/Right Arrows to select the previous
or next carrier.
Selecting The Low And High Carriers
Notice that the bars representing the low and high pilots are solid
and all others are dim. You can select which carriers are used for
the tilt measurement. To select the low pilot carrier, move the
Cursor to the Desired Carrier and press Select Low Pilot Carrier
soft key. To select the high pilot carrier, move the Cursor to the
desired carrier and press Select Low Pilot Carrier soft key. The tilt
measurement is calculated from the low and high pilot carriers that
you have selected.
2-17