Specifications

2-18
Adjusting The Reference Level
The reference level setting is displayed above the graph. This is the
level at the very top line. You can adjust the reference level by
pressing the Up/Down Arrows. When you press Shift + Auto
Reference Level keys, your MS1400 automatically sets the
optimum reference level for you.
Adjusting The Scale
The scale setting is displayed above the graph. You can adjust the
scale to provide the best view of the carrier levels by pressing the
Enter Scale Submenu key. A new set of soft keys appears. Use the
Increment/Decrement soft keys to increment and decrement the
scale value. Press Exit Scale Submenu key when you have
finished.
Measurement Hold
You can freeze the tilt measurement at any time by pressing the
Shift + Snapshot keys. The measurement is retained even if the
cable is disconnected from the input port. Notice that the mode icon
in the upper left-hand portion of the screen flashes when the
measurement is on hold. Press Shift + Snapshot keys again to
release the hold. The measurement is not retained when another
mode is selected or the MS1400 is shut off.
Printing The Screen
You can print the entire screen at any time by pressing the Shift +
Print keys. A bar graph appears indicating the status of the printout.
Storing A Tilt File
Press Shift + Store keys to store the current tilt measurement into a
file. A screen will appear asking you to enter a name for the file.
Once stored, you will be able to recall the file at a later time and
view it on the Tilt screen. You will be able to adjust the screen
settings the same as when you are viewing a “live” measurement.
See VIEW page 2-27 to find out how to access files that you have
stored.