Specifications

SCAN
The MS1400 includes an additional SCAN mode that can display up to
six video carriers. You can access this mode by choosing Full Scan
Mode icon from the NAVIGATOR.
NOTE: The channels that appear on this
screen are the same ones that you selected
when you configured your tilt channels. (see
Select Tilt Channels page 1-32).
Moving The Marker
A vertical marker appears over the currently selected carrier. The
channel number, type and label appear in the upper right-hand
portion of the screen. The frequency and level of the selected carrier
can be seen directly beneath the graph. You can press the
Left/Right Arrows to select the previous or next carrier.
Adjusting The Reference Level
The reference level setting is displayed above the graph. This is the
level at the very top line. You can adjust the reference level by
pressing the Up/Down Arrows. When you press Shift + Auto
Reference Level keys, your MS1400 automatically sets the
optimum reference level for you.
2-19