Specifications

represented in the upper portion of the screen by one of the
following icons:
Subscriber Drop
Ground Block
Tap
User Defined
NOTE: Be sure that you have enabled all of
the test points that you are interested in using.
The Cycle Through Test Points soft key is
only available if there is more than one
enabled test point. (see How To Edit Test
Points page 1-20).
Only the limits that are enabled in the selected test point will be
checked.
NOTE: When viewing the data from an
interval, you can print a comprehensive report
by pressing Shift + Print (later) and upload to
StealthWare to keep on record, or for further
analysis (comparison with other traces).
Viewing Ingress Files
See INGRESS page 2-34.
2-33