Specifications

Zooming In And Out
To zoom in on or out from the channel selected by the marker,
press the Enter Zoom Mode soft key. A new set of soft keys will
appear. Use the Zoom In soft key to zoom in and the Zoom Out
soft key to zoom out. The magnification factor is displayed above
the graph. Press the Exit Zoom Mode soft key when you have
finished.
Resolution
Resolution affects how much detail you see on the graph. Your
MS1400 allows you to adjust the resolution so that you can optimize
the response time depending upon how much detail you want to
see.
There are four resolution settings; LOW, MEDIUM, HIGH, and
ULTRA. You can increase the resolution by pressing the Shift + up
arrow or decrease it by pressing the Shift + down arrow.
You can determine what the current setting is by looking at the
resolution indicator in the upper left-hand portion of the display
directly below the title bar:
Low
Medium
High
Ultra
Peak Measurement Hold
This feature is useful for catching transient or intermittent ingress.
Press Toggle Peak Hold soft key to toggle the peak hold function
on and off.
Notice that the Peak Hold Enabled icon appears in the upper-right
portion of the screen whenever peak hold is enabled. The numeric
value to the left of the Peak Hold Enabled icon represents the peak
level at the marker position. Peak measurements are displayed on
the graph as a dimmed trace. Press the Toggle Peak Hold soft key
again to release the peak hold function.
2-35