Specifications

MODEL MS1400
Appendix B:
Power and
Battery
Management
BATTERY PACK LOCATION AND INSTALLATION
The MS1400 battery cartridge (1019-00-0479) is located on the back of
the unit. To remove or replace the battery pack, pull the notched tab
downward, and lift the battery pack.
To install the battery pack, insert the bottom of the pack into the groove
and press down on the battery pack until it clicks into place.
WARNING: Use
only the battery pack
specified for use with the MS1400.
Charging the Battery Pack
To recharge the battery pack, plug the AC adapter into the unit. The
unit will be fully charged in 16 hours with unit off, and 30 hours with
unit operating. Use only the AC adapter supplied with the unit or
obtained from JDSU. Use of any other adapter could damage
the unit.
CAUTION: Battery Disposal Ni-Cd
Rechargeable Battery must be recycled or
disposed of in accordance with local
environmental regulations.
B-1