Mfg. Co. Weather Radio User Manual

5-4 Clear Memory
1. Press and hold the “ Set Button” (4-6, Fig.1) for about 3 seconds.
2. The main LCD should then display1000. Now press the “ Enter Button” (4-4-, Fig. 1).
3. Press the “ Set Button” (4-6, Fig.1) three times and you will see the CLr marker in the bottom
of the LCD. The top number is the number of stored data points.
4. Press the “ Function Button” (4-5, Fig. 1) and the top number will go to zero.
5. Press the “ Enter Button” (4-4-, Fig. 1) to clear memory.
6. You can press the “ ESC Button” (4-3, Fig. 1) return to the normal measurement mode.
6. Auto Power Off Disable
This instrument has a “ Auto Power Off " function that can prolong battery life. The meter will
shut off automatically if none of the buttons are pressed in approx. 10 min.
To disable this function, select the memory record function during a measurement by pressing
the " REC. Button” (4-4, Fig. 1 ).
10