User Guide

13
16
Diagnose - Actuator Test
Actuator Test
1
Fuel Injector #1 Control State
2
Fuel Injector #2 Control State
3
Fuel Injector #3 Control State
4
Fuel Injector #4 Control State
5
Fuel Injector #5 Control State
6
Fuel Injector #6 Control State
The Actuator Test function is used to access vehicle-specific subsystem and component tests.
Available tests vary depending on the manufacturer, year, and model, and only the available tests
will be displayed in the menu.
During an active test, the tester outputs commands to the ECU in order to drive the actuators.
This test determines the integrity of the system or parts by reading the engine ECU data, or by
monitoring the operation of the actuators, such as switching a solenoid, relay, or switch, between
two operating states.
Diagnose - Special Function
Special Function
1
Learn ETC
2
Engine
3
Cam Crank
4
Clear Learned Variable Line
5
Check PCM Odometer
6
These functions perform various component adaptations, allowing you to recalibrate or configure certain
components after making repairs or replacement.
17