Use and Care Manual

— 11 —
Installation
STEP 10
Mark Placement of Range Hood Mounting Screws
• Use a pencil to mark on the wall the desired placement of the range hood mounting screws.
• Screw two wood screws (not provided) into wall.
• Leave approximately 1/4” (6.3 mm) of the screw head protruding from the wall to allow clearance for mounting the
range hood.
• Use threaded drywall anchors when mounting the range hood onto sheet rock. Mounting the hood into wall studs or
lumbars is highly recommended.
2-3/8”
(60 mm)
1” (25 mm)
1” (25 mm)
2-3/8”
(60 mm)
15” (381 mm)
STEP 8
Attach Motor Body to Main Housing
• Align the 3 screw holes on the bottom edge of the Motor Body with the 3 holes on the bottom edge of the Main
Housing.
• Then align the remaining 9 screw holes and screw together the two pieces using the screws provided.
STEP 9
Join the Connectors
• Join together the quick connectors at the back of the
main housing and motor body.