Use and Care Manual

— 14 —
Installation
STEP 16
Install Upper Chimney Bracket
• Position the upper chimney bracket onto the wall
directly below the ceiling. Align the upper chimney
bracket with the range hood below.
• Use a pencil to mark desired placement of the upper
chimney bracket on the wall.
• Use two wood screws (not provided), and screw the
upper chimney bracket into the wall.
• Use threaded drywall anchors when mounting
the bracket onto sheet rock. Mounting the upper
chimney bracket into wall studs or lumbars is highly
recommended.
STEP 17
Install Upper Chimney
• Remove the protective lm from the upper chimney.
Carefully slide the upper chimney inside the lower
chimney.
• Extend the telescopic upper chimney until it reaches
the upper chimney bracket and attach the upper
chimney to the bracket using the provided screws.
• Peel off protective lm from the rest of the range hood.
15-1/2” (393 mm)
9-3/4” (247 mm)2-3/4” (70 mm) 2-3/4” (70 mm)
Align the upper chimney
bracket with the range
hood below.