Installation Guide

Installations (refer to Page 4 for parts):
NOTE: Use threaded drywall anchors only when
mounting the hood on sheet rock. Mounting
the hood on wall studs or lumbars is highly
recommended.
Step 1: Measuring
• Measure the distance between stove top and the bottom of range hood. A distance of 24” to 30” is
recommended with a minimum of 30” for gas stove tops.
• To reach 9ft ceiling make sure hood is installed at 31” from cooking surface
• If you require longer chimney flue to reach your ceiling please contact vendor.
Step 2: Installing the hood mounting bracket
•
The range hood will be installed on top of this bracket.
(See Figure # 1)
• Using references in Height & Clearance on Page 5 and Measurements and Diagrams on Page 16,
Drill 3 holes that will be used to fix the lower mounting bracket.
• Drill 2 holes according to the size of the upper
mounting bracket. The upper mounting bracket
should be positioned flush with the top of the
outside chimney (See Figure # 1)
•
Screw upper and hood mounting brackets in
tightly.
INSTALLATION:
Step 3: Installing upper chimney bracket
Hardware Note: For safety reasons, range hood mounting screws and anchors will not be
included due to the variation of cabinetry constructions and wall material. Please consult your
installation specialist regarding the optimal type of mounting screws and wall anchors to suit
your home’s construction.
10