Installation Guide

REPLACEMENT INSTALLATION:
SAFETY WARNING: Risk of electrical shock. This range hood must be properly grounded. Make sure
this is done by a qualified electrician in accordance with all applicable national and local electrical codes.
Before connecting wires, switch power off at service panel and lock service panel to prevent power from
being switched on accidentally.
Step 5: Venting
certified aluminum or foil tape so that it is air tight. Please check the
Step 6: Electrical Connection
DON’T FORGET TO CONNECT THE GROUND!
Step 7: Installing Filters
hood
• Open the wiring compartment and secure the leads inside.
• Please use the bushing provided on the cut-out opening to protect
the electrical wires.
• WARNING: ALL CONNECTORS MUST BE ENCLOSED
IN THE WIRING COMPARTMENT.
5)
Fig #
5
Fig #
6
6)
building codes in your city to learn which tape product is recommended.
13