User`s manual

<7. Operation>
7-7
IM 01C25B01-01E
7.6.2 Activating Local Parameter Setting
Press the push button on the integral indicator to
activate the Local Parameter Setting mode. The
transmitter will exit automatically from the Local
Parameter Setting mode if no operation is carried
out for 10 minutes.
7.6.3 Parameter Setting Review
Current setting value for the below parameters
areshownsequentiallybyeachpressofthepush
button.
Tag number, Unit, LRV, URV, Damping,Output
mode(linear/squareroot),Displayout1.
F0711.ai
push
push
push
push
push
Process
Measurement
Display
push
push
push
push
Process
Measurement
Display
*
*: Up to 6 characters are shown in the bottom line. To review
after the 7th character, turn the external adjustment screw and
press the push button six times or more.
Tocongureeachparametervalue,turnthe
external adjustment screw on each parameter
screen after activating the Local Parameter Setting
mode.
To cancel the Local Parameter Setting
conguration,pleasereferto7.6.11SaveorCancel
and7.6.12AbortConguration.