User`s manual

<9.GeneralSpecications>
9-2
IM 01C25B01-01E
EJA120E
Measurement
Span/Range
kPa inH
2O(/D1) mbar(/D3) mmH2O(/D4)
E
Span 0.1 to 1 0.4 to 4 1 to 10 10 to 100
Range -1 to 1 -4 to 4 -10 to 10 -100 to 100
EJA130E
Measurement
Span/Range
kPa inH
2O(/D1) mbar(/D3) mmH2O(/D4)
M
Span 1 to 100 4 to 400 10 to 1000 100 to 10000
Range -100 to 100 -400 to 400 -1000 to 1000 -10000 to 10000
H
Span 5 to 500 20 to 2000 50 to 5000 0.05 to 5 kgf/cm
2
Range -500 to 500 -2000 to 2000 -5000 to 5000 -5 to 5 kgf/cm
2
EJA310E
Measurement
Span/Range
kPa abs
psi abs
(/D1)
mbar abs
(/D3)
mmHg abs
(/D4)
L
Span 0.67 to 10
0.2 to 2.95
inHg
6.7 to 100 5 to 75
Range 0 to 10 0 to 2.95 inHg 0 to 100 0 to 75
M
Span 1.3 to 130
0.39 to 38
inHg
13 to 1300 9.8 to 970
Range 0 to 130 0 to 38 inHg 0 to 1300 0 to 970
A
Span
0.03 to 3.5
MPa
4.3 to 500
0.3 to 35
bar
0.3 to 35 kgf/cm
2
Range 0 to 3.5 MPa 0 to 500 0 to 35 bar 0 to 35 kgf/cm
2
B
Span
0.14 to 16
MPa
20 to 2300
1.4 to 160
bar
1.4 to 160
kgf/cm
2
Range 0 to 16 MPa 0 to 2300 0 to 160 bar 0 to 160 kgf/cm
2
EJA430E
Measurement
Span/Range
MPa psi (/D1) bar(/D3)
kgf/cm
2
(/D4)
H
Span 5 to 500 kPa
20 to 2000
inH
2O
0.05 to 5 0.05 to 5
Range
-100 to 500
kPa
-400 to 2000
inH
2O
-1 to 5 -1 to 5
A
Span 0.03 to 3.5 4.3 to 500 0.3 to 35 0.3 to 35
Range -0.1 to 3.5 -14.5 to 500 -1 to 35 -1 to 35
B
Span 0.14 to 16 20 to 2300 1.4 to 160 1.4 to 160
Range -0.1 to 16 -14.5 to 2300 -1 to 160 -1 to 160
EJA440E
Measurement
Span/Range
MPa psi (/D1) bar(/D3) kgf/cm
2
(/D4)
C
Span 5 to 32 720 to 4500 50 to 320 50 to 320
Range -0.1 to 32 -14.5 to 4500 -1 to 320 -1 to 320
D
Span 5 to 50 720 to 7200 50 to 500 50 to 500
Range -0.1 to 50 -14.5 to 7200 -1 to 500 -1 to 500
Output “◊”
For 4 to 20 mA output
(Output signal code D, E and J)
Two wire 4 to 20 mA DC output with digital
communications,linearorsquareroot
programmable. BRAIN or HART FSK protocol
are superimposed on the 4 to 20 mA signal.
Output range: 3.6 mA to 21.6 mA
Output limits conform to NAMUR NE43 can be
pre-set by option C2 or C3.
For 1 to 5 V output (Output signal code Q)
Three or four wire low power 1 to 5 V DC output
withHART,linearorsquarerootprogrammable.
HART protocol is superimposed on the 1 to 5 V
DC signal.
Output range: 0.9 V to 5.4 V DC
Failure Alarm “◊”
For 4 to 20 mA output
(Output signal code D, E and J)
Analog output status at CPU failure and
hardware error;
Up-scale: 110%, 21.6 mA DC or more
(standard)
Down-scale: –5%, 3.2 mA DC or less
For 1 to 5 V output (Output signal code Q)
Analog output status at CPU failure and
hardware error;
Up-scale: 110%, 5.4 V DC or more (standard)
Down-scale:−5%,0.8VDCorless
Damping Time Constant (1st order)
Amplierdampingtimeconstantisadjustable
from 0 to 100.00 seconds and added to
response time.
Note: ForBRAINprotocoltype,whenamplierdamping
is set to less than 0.5 seconds, communication
may occasionally be unavailable during the
operation, especially while output changes
dynamically. The default setting of damping
ensures stable communication.
Update Period “◊”
Differential Pressure: 45 ms
Static Pressure: 360 ms
Zero Adjustment Limits
Zero can be fully elevated or suppressed, within
the lower and upper range limits of the capsule.
External Zero Adjustment “◊”
External Zero is continuously adjustable with
0.01% incremental resolution of span. Re-range
can be done locally using the digital indicator
with range-setting switch.
Integral Indicator (LCD display)
5-digit Numerical Display, 6-digit Unit Display
and Bar graph.
Theindicatoriscongurabletodisplayoneor
up to four of the following variables periodically.;
Differential pressure in %, Scaled Differential
pressure, Differential Pressure in Engineering
unit, Static Pressure in Engineering unit.
See “Setting When Shipped” for factory setting.