User`s manual

  <9.GeneralSpecications>
9-5
IM 01C25B01-01E
Load Capacitance
0.22μForless
Load Inductance
3.3 mH or less
Input Impedance of communicating device
10kΩormoreat2.4kHz.
HART
Communication Distance
Up to 1.5 km (1 mile) when using multiple
twisted pair cables. Communication distance
varies depending on type of cable used.
EMC Conformity Standards
EN61326-1 Class A, Table2 (For use in industrial
locations)
EN61326-2-3
EN61326-2-5 (for PROFIBUS only)
PerformanceSpecicationsunderEMI
Differentialpressure:Outputshiftisspecied
within±1%of1/20Maxspan.
Staticpressure:Outputshiftisspeciedwithin
±2%of1MPaspan.
 PhysicalSpecications
Wetted Parts Materials
Diaphragm, Cover Flange, Process
Connector,CapsuleGasket,andVent/Drain
Plug
Referto“ModelandSufxCode.”
ProcessConnectorGasket/o-ring
[EJ110, EJ120, EJ430, EJ310]
PTFETeon
Fluorinated rubber for Option code /N2 and /N3
[EJ130]
Fluorinated rubber (O-ring)
[EJ440]
Fluorinated rubber (O-ring) for C capsule
GlassreinforcedTeon(gasket)forDcapsule
Non-wetted Parts Materials
Bolting
ASTM-B7 carbon steel, 316L SST stainless
steel, or ASTM grade 660 stainless steel
Housing
Low copper cast aluminum alloy with
polyurethane paint or ASTM CF-8M stainless
steel
Degrees of Protection
IP66/IP67, NEMA TYPE 4X
Cover O-rings
Buna-N,uoro-rubber(option)
Nameplate and tag
316SST (including /N4 wired tag)
Fill Fluid
Silicone, Fluorinated oil (option)
Weight
[Installation code 7, 8, and 9 and wetted parts
material code S for EJ110, EJ310, and
EJ430 (Except for measurement span code
F)]
2.8 kg (6.2 lb) without integral indicator,
mounting bracket, and process connector.
[Installation code 7, 8, and 9 for EJ120]
3.7 kg (8.2 lb) without integral indicator,
mounting bracket, and process connector.
[Installation code 7, 8, and 9 for EJ130]
6.8 kg (14.3 lb) without integral indicator,
mounting bracket, and process connector.
[Installation code 7, 8, and 9 for EJ440]
4.9 kg (10.8 lb) without integral indicator,
mounting bracket, and process connector.
Add1.5kg(3.3lb)foramplierhousingcode2.
Connections
Referto“ModelandSufxCode.”
Process Connection of Cover Flange (models
except for EJ440-D): IEC61518