User`s manual

<9.GeneralSpecications>
9-22
IM 01C25B01-01E
9.4 Dimensions
Model EJ110
Unit: mm (approx. inch)
95(3.74)
242(9.53)
175(6.89)
129(5.08)
97
(3.82)
223(8.78)
52
(2.05)
97(3.82)
41
(1.61)
67(2.64)
Electrical connection
for code 5, 9, A, and D.
(optional)
External indicator
Conduit connection
Integral indicator
(optional)
Zero adjustment
Ground terminal
Mounting bracket
(L-type,optional)
Process connection
Conduit
connection
110(4.33)
ø78(3.07)
ø70(2.76)
39
(1.54)
12
(0.47)
138(5.43)*
2
54
(2.13)
54
(2.13)
2-inch pipe
(O.D. 60.5 mm)
Vent/Drain
plugs
6
(0.24)
54
(2.13)
6
(0.24)
175(6.89)
145(5.71)124(4.88)
47
(1.85)
95(3.74)
89(3.50)
115(4.53)
41
(1.61)
110(4.33)
12
(0.47)
39
(1.54)
ø70
(2.76)
129(5.08)
ø78(3.07)
130(5.12)*
3
67
(2.64)
Drain plug*
4
2-inch pipe
(O.D. 60.5 mm)
Vent plug*
4
Zero
adjustment
Ground
terminal
Drain plug*
4
Vent plug*
4
Mounting bracket
(Flat-type,optional)
Electrical connection
for code 5, 9, A, and D.
Conduit
connection
(optional)
External indicator
Conduit connection
Integral indicator
(optional)
(optional)
Process
connection
54(2.13)
● Horizontal Impulse Piping Type (Installation code 9)
*1: When Installation code 2, 3, or 8 is selected, high and low pressure side on the above figure
are reversed. (i.e. High pressure side is on the right side.)
*2: When Option code K1, K2, K5, or K6 is selected, add 15 mm(0.59 inch) to the value in the figure.
*3: When Option code K1, K2, K5, or K6 is selected, add 30 mm(1.18 inch) to the value in the figure.
*4: Not available when option code GS is specified.
● Vertical Impulse Piping Type
High
pressure
side
*1
Low
pressure
side
*1
Low
pressure
side
*1
High
pressure
side
*1
(optional)
Process
connector
Process connector
223(8.78)
52
(2.05)
97(3.82)
67(2.64)
Process connector upside
(Installation code 6)
Process connector downside
(Installation code 7)
Process
connection
41
(1.61)
F0904.ai
Vent plug,
Drain plug*
4