User's Manual

DN:ZRY721-SMSY01 V1.0 Operation Guide
Template version:1 11/18
7. DISPLAYING STORED RESULTS
a. In StandBy Mode, press “MEM” button, the monitor will blink sign of current
group.Press “MEM” button to switch group,press “START/STOP” to confirm current
group.Then the amount of results in current user memory zone will be displayed. See
picture 8. Then LCD will display the average value of all results in the current user
memory zone.If the bluetooth function is on, the device will wait for pairing for 30s.
See picture 8-1. If no result stored in the current user memory zone, LCD will display
“0” for blood pressure and pulse rate. See picture 8-2.
b. Press “MEM” button, LCD will display the average value of all the results which is
measured from 5 o’clock to 9 o’clock in last 7 days in the current user memory zone.
See picture 8-3. If no result stored from 5 o’clock to 9 o’clock in last 7 days, LCD will
display “0” for blood pressure and pulse rate. See picture 8-4.
Picture 8 Picture 8-1 Picture 8-2 Picture 8-3 Picture 8-4
c. Press “MEM” button again, LCD will display the average value of all the results which
is measured from 18 o’clock to 20 o’clock in last 7 days in the current user memory
zone. See picture 8-5. If no result stored from 18 o’clock to 20 o’clock in last 7 days,
LCD will display “0” for blood pressure and pulse rate. See picture 8-6.
Picture 8-5 Picture 8-6 Picture 8-7 Picture 8-8 Picture 8-9
d. Press “MEM” button again, the most recent result will be displayed with date and time
stamp. See picture 8-7. Irregular heartbeat symbol (if any) and blood pressure
classification indicator will blink at the same time. If the monitor has no result stored in
the current user memory zone, the LCD will display “0” for blood pressure and pulse
rate. See picture 8-8.
e. Press “MEM” button again to review the next result. See picture 8-9. In this way,
repeatedly pressing the “MEM” button displays the respective results measured
previously.
f. When reviewing the results, the monitor will turn off automatically after 1 minute of no
operation. You can also press the “START/STOP” button to turn off the monitor
manually.