User's Manual

DN:ZRY721-SMSY01 V1.0 Operation Guide
Template version:1 12/18
Note: When the monitor displaying the measurement, the classification color indicator
can be shown different color according to the systolic pressure and diastolic
pressure. Refer to the “ASSESSING HIGH BLOOD PRESSURE FOR ADULTS”
section
8. DELETING MEASUREMENTS FROM THE MEMORY
When any average value is displaying, keeping on pressing button
“MEM” for three seconds, all results will be deleted after three “beep”.
When any result is displaying, keeping on pressing button “MEM” for
three seconds, current result will be deleted after three “beep”.
Press the button “START/STOP”, the monitor will turn off.
9. ASSESSING HIGH BLOOD PRESSURE FOR ADULTS
The following guidelines for assessing high blood pressure (without regard to age or gender)
have been established by the World Health Organization (WHO). Please note that other
factors (e.g. diabetes, obesity, smoking, etc.) need to be taken into consideration. Consult with
your physician for accurate assessment, and never change your treatment by yourself.
Note: It is not intended to provide a basis of any type of rush toward emergency
conditions/diagnosis based on the color scheme and that the color scheme is meant only to
discriminate between the different levels of blood pressure.
10. TECHNICAL ALARM DESCRIPTION
The monitor will show 'HI' or 'Lo' as technical alarm on LCD with no delay if the determined
blood pressure (systolic or diastolic) is outside the rated range specified in part
SPECIFICACIONS. In this case, you should consult a physician or check if your operation
violated the instructions.