OWNER’S MANUAL Ceiling Fan Installation Instructions Total fan weight with light kit READ AND SAVE THESE INSTRUCTIONS
INSTALLATION SAFETY TIPS WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: READ AND SAVE THESE INSTRUCTIONS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. Installation work and electrical wiring must be done by qualified person(s) in accordance with applicable codes ANSI/NFPA 70-1999), including fire-rated construction. Use this unit only in the manner intended by the manufacturer. If you have any questions contact the manufacturer.
19 20 21 Locate blue and white wire from the fan marked “For light kit”. Connect blue from fan to black from light and white from fan to white from light by pushing connectors together. Attach switch cap to fan by lining up 3 screw holes and twisting cap clockwise. Then tighen the 3 screws. Install 2 x 60 watt (E12) based bulbs. 22 Push glass up into fitter and hand tighten the 3 screws to hold in place.
TROUBLE SHOOTING If you have difficulty operating your new ceiling fan, it may be the result of incorrect assembly, installation, or wiring. In some cases, these installation errors may be mistaken for defects. If you experience any faults, please check this Trouble Shooting Chart. If a problem cannot be remedied, or you are experiencing difficulty in installation, please call our Customer Service Center at the number printed on your parts list insert sheet.