User's Manual

U
SER
´
S MANUAL FOR BAND SELECTIVE REPEATERS
MR
X
03P
User'sManual.doc Id.-No.:154999 Page 38 22-Jan-01
5.6. LEVELLING OF THE REPEATER
After software-login, the repeater must be levelled so that the highest output power is
achieved without reaching the ALC (Automatic Level Control).
∗ Note: When the local software configuration is finished, don´t forget to
switch back DIP-switch 2 of the mode-switch to position ON,
otherwise the remote mode via modem will not work!