Manualshelf

User's Manual

ManualsBrandsAndrew Wireless Innovations Group ManualsElectronicsSMR Repeater
41424344454647484950
U
SER
´
S MANUAL FOR BAND SELECTIVE REPEATERS
MR
X
03P
User'sManual.doc Id.-No.:154999 Page 44 22-Jan-01
8.2. REPLACEMENT OF THE FUSES
The power supply is protected with a primary fuse, type T6.3A / 250V.
figure 8-1 Fuse replacement
8.3. REPLACEMENT OF THE MAINS CABLE
In case the length of the delivered mains cable should not be sufficient or in case of a
defect, the mains cable can be replaced.
∗ Note: Disconnect repeater from mains first!
Remove the cover plate with the lock and open the housing by lifting the fixing clamp
The mains cable is now accessible from the bottom of the heat sink. Unscrew it from
the clamps on the connecting board (see figure 8-2 Connecting board) as well as the
small bar fixed with one tallow-drop screw M3.
figure 8-2 Connecting board
Fuse