User's Manual

U
SER
´
S MANUAL FOR BAND SELECTIVE REPEATERS
MR
X
03P
User'sManual.doc Id.-No.:154999 Page 51 22-Jan-01
9. APPENDIX
9.1. ELECTRICAL SPECIFICATIONS
9.1.1. Specifications of MR703P
Specifications MR703P
Frequency range MR703P-ADB
MR703P-EFC
MR703P-DBEF
UL:1850-1885 MHz, DL: 1930-1965 MHz
UL:1875-1910 MHz, DL: 1955-1990 MHz
UL:1865-1895 MHz, DL: 1945-1975 MHz
Bandwidth 0.2-
15 MHz, 2.5 dB gain degradation at
200 kHz
Gain 70 dB min.,
K
2 dB over frequency and
temperature range
Gain adjust range 30 dB in 2 dB steps
Spurious intermodulation -13 dBm max.
Noise figure (@ max. gain) UL and DL 8 dB max.
ALC dynamic range 10 dB
OICP-3 +44 dBm min.
P
1dB
+34 dBm min.
Return loss (@ 25°C amb. temp.) 10 dB min.
Power supply 110 Vac, 230 Vac, 24 Vdc or 48 Vdc
Power consumption 95 Watt typ.
Built in test equipment Current monitor
Synthesizer lock monitor
Temperature
ALC active
Alarm forwarding
Potential free relay contact and automatic
alarm call via RS232 or PCMCIA
interface
Control functions Gain
Center frequency
ALC threshold
RF connectors 2 x 7/16 female, N as an option
*Please contact the MIKOM sales office for further questions to available bandwidths.
GSM TDMA CDMA
P
out
for 1 channel 34 dBm 31 dBm 27 dBm
P
out
/channel for
2 channels
24 dBm 24 dBm 22 dBm
P
out
/channel for
4 channels
20 dBm 20 dBm 19 dBm
table 9-1 Specification of MR703P
All data is subject to change without notice!