Installation guide

MAINTENANCE / SERVICESECTION 6

KEEP APPLIANCE AREA CLEAR AND FREE FROM COMBUSTIBLE MATERIALS,

PETROL AND OTHER FLAMMABLE VAPOURS AND LIQUIDS.

Water heater maintenance includes periodic tank flushing and cleaning, and removal of lime

scale. The unit should be inspected and adjusted to maintain proper combustion. Refer to

Fig 17 below, “Suggested Maintenance Schedule”. A periodic inspection of the flue

installation system should be made.

GENERAL

Following are the instructions for performing some of the recommended maintenance.

Unit inspection and adjustment should be performed by a competent qualified engineer.

As Correx Up

anodes are fitted as standard to this appliance, no maintenance is

necessary.

MAINTENANCE

SCHEDULE

COMPONENT OPERATION INTERVAL REQUIRED

Tank Sediment Removal Every 6 months Flushing

Relief Valve Check Operation Every 6 months Proper

Operation

Exhaust & Air Inspect Every 3 Months Joints should

Intake System be sealed

Ignition System Inspect Annually Clean of dust

and dirt

Flue Vent Terminal Clean Inlet Screen As Required Soft Brush

Flue Terminal Free of Shrubs & Debris Monthly Remove object

Horizontal or that caused

Vertical restriction

Combustion System Inspect Monthly Confirm S-OP

Condensate Inspect Monthly Remove

Waste Pipe restriction

CORREX

ANODES

Fig.17